USING THE
PATIENT ASSISTANT

If you received a Patient Assistant, carry it with you at all times so you can use it to mark symptoms such as dizziness, fainting or palpitations. Data is marked in your Reveal LINQ ICM and sent to your doctor during your next automatic transmission.

Patient Assistant

To Use the Patient Assistant:

  1. When you experience a symptom, press and release the button. The searching light will start to flash blue.
  2. Quickly hold the Patient Assistant flat against your chest, directly over your Reveal LINQ ICM.
  3. When a symptom is successfully marked, the success tone will sound and the success light will illuminate green. If the success signals do not occur within 15 seconds, repeat steps 1-2.